Sony ICD-MS1 operating instructions Error Messages, Memory Stick Error

Error Messages

IC Recorder

“MEMORY STICK ERROR“

Insert the “Memory Stick“ again. After inserting, if this message is displayed again, the inserted “Memory Stick“ may be out of order.

“NO MEMORY STICK“

Insert the “Memory Stick“ again if already inserted.

“UNKNOWN DATA“

The unit cannot play or erase the selected message because the file type is different.

“ACCESS ERROR“

After checking the write-protect switch, insert the “Memory Stick“ again. If this is displayed again, the inserted “Memory Stick“ needs to be formatted (page 35). Back up the data in the computer after checking the contents.

“MEMORY STICK LOCKED“

The write-protect switch on the inserted Memory Stick is set to “LOCK“ (page 11). You cannot record, edit or format in this condition. Slide the switch to the left and insert again.

“FILE PROTECT“

Messages have been set to “Read-only“ in the computer. You cannot edit or erase messages and folders including these “Read-only“ messages.

Remove the check for “Read-only“ under “Properties“ of files that are opened by Windows Explorer.

“FOLDER PROTECT“

Folders have been set to “Read-only“ in the computer. You cannot edit, erase, add messages, or move messages in these “Read-only“ folders.

Remove the check for “Read-only“ under “Properties“ of folders that are opened by Windows Explorer.

“LOW BATTERY“

Batteries are weak. Replace batteries with new ones.

“INDEX FULL“

Because there are over 999 messages in the folders or the remaining memory of the Memory Stick is short, it is impossible to add an index. Erase some messages before adding.

“FOLDER FULL“

Because the remaining memory of the “Memory Stick“ is short, it is impossible to add a folder. Erase some folders or messages before adding.

“INDEX ERASE PROHIBITED“

You cannot erase an index to combine messages of different recording modes.

“FOLDER ERASE PROHIBITED“

You cannot delete the last folder left in a “Memory Stick“.

“ALREADY SET“

You set the alarm to play back a message at a date and time previously set on another message. Change the alarm date and time or the previously set date and time.

“BACK DATE“

You set the alarm when the time is already past. Check it and set the appropriate date and time again.

“NO MEMORY SPACE“

There is no space to record in the inserted “Memory Stick“. Erase recorded messages or insert another “Memory Stick“.

If there are other formatted data in the “Memory Stick“, delete them on the unit used to record them.

“NO MESSAGE“

There is no recorded message in the folder. You cannot make alarm setting, etc., because of this.

“PLEASE SET DATE & TIME“

If you do not set date and time, you cannot set the alarm. To set date and time, see page 10.

Continued

Additional Information

65