Playing Back a Message at a Desired Time with an Alarm (Continued)
Notes
•If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back.
•If the alarm time comes during recording, the alarm will sound after the recording is finished. “,” will flash when the alarm time comes.
•If more than one alarm time comes during recording, only the first message will be played back.
•When the alarm time comes when the unit is in the menu mode, alarm will sound and the menu mode will be cancelled.
•If you erase the message you set the alarm for, the alarm setting will be cancelled.
•If you add an index to the message you set the alarm for, alarm setting remains on only the first part of the divided message.
•If you erase the index on the message you set the alarm for, the alarm setting will be cancelled.
•You can adjust the playback volume with the VOL control.
•If the alarm time comes during erasing, the alarm will sound after the erasing is finished.
•Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see below.
To check the alarm setting
Follow steps 1 and 2 on page 30 after selecting the alarm setting. The alarm date and time will be displayed in the display window.
To cancel the alarm setting or change the alarm time
1Select the message you set the alarm for, and press MENU button.
2Select “ALARM“ and press the jog lever. 3To cancel the alarm setting: Press the jog
lever up or down to select “OFF” and press the jog lever.
To change the alarm date and time: Press the jog lever.
When the alarm date is displayed, follow steps 3 to 5 on pages 30 and 31 to change the alarm date and time.
4Press MENU button. Exit the menu mode.
32