Dividing a Message into Two / Combining Messages — Index Function
You can divide a message by adding an index, or combine messages by erasing the index.
While recording/playing back messages, you can add an index (see below). In stop mode, you can erase the index (see the next page).
INDEX
Jog lever
ERASE
STOP
To mark an index during recording
While recording a message, press INDEX button at the point you want to divide.
The new message number is added at the point you pressed INDEX button, and “ADD INDEX“ flashes three times. The message will be divided in two messages; however, the messages will be recorded without a break.
RECORDING
S P
ADD INDEX
An index is added.
Message 1 Message 2 Message 3
Recording continues.
1Tip
You can add an index during recording pause (page 13).
Dividing a Message by Adding an Index
You can add an index to a message during recording or playback.
By dividing a message, you can easily find the point you want to play back when you make a long recording such as a meeting.
When you add an index, the message numbers will increase as follows.
An index is added.
Message 1 | Message 2 | Message 3 |
| |
|
|
|
|
|
Message 1 | Message 2 | Message 3 | Message 4 |
|
The first item on | We will now proceed | |||
the agenda is... | to the next subject. | |||
The message numbers increase.
To add an index during playback
While playing back a message, press INDEX button at the point you want to divide.
The message is divided in two and “ADD INDEX“ flashes three times.
An index mark is added and the following index numbers will increase by one.
FOLDER O1
S P
ADD INDEX
1Tip
You can add an index after you have paused playback with X(pause) button (page 16).
To play the message you marked with an index
Press the jog lever up or down to display the message number as the divided messages each have message numbers.
22
