Playing Back Messages (continued)

Other operations

To stop playback

To

Do this

 

 

stop at the

Press STOP.

beginning of the

 

current message

 

stop at the current

Press the jog lever.

position

To resume playback

(Playback Pause

from that point,

function)*

press the jog lever

 

again.

*You can also pause playback by pressing X(pause) instead of the jog lever. The OPR indicator will flash in green. After about one hour, the unit goes into the stop mode at the current position.

To select the desired message

To

Do this

 

 

go back to the

Press the jog lever up

beginning of the

once and release it.

current message

 

go back to previous

Press the jog lever

messages

up several times and

 

release it.

skip to the next

Press the jog lever

message

down once and

 

release it.

skip to the succeeding

Press the jog lever

messages

down several times

 

and release it.

1Tip

When playback is done to the end of the last message, “MSG. END” flashes for 3 seconds and the OPR indicator lights up in green. (You cannot hear the playback sound.) If you keep pressing the jog lever up while “MSG. END” is flashing, the messages will be played back rapidly, and normal playback will start at the point you release the jog lever.

When “MSG. END” stops flashing and the OPR indicator goes off, the unit will stop at the beginning of the last message.

If the last message is long and you wish to start playback at a later part of the message, keep pressing the jog lever down to play back the message to the end and then press the jog lever up while “MSG. END” is flashing to go back to the desired point .

(For messages other than the last one, go to the beginning of the next message and play backward to the desired point.)

Playing the beginning of each message

Scanning Play

See page 19.

Playing back all messages in a folder continuously

Continuous Play

See page 37.

Searching forward/backward during playback (Cue/Review)

To search forward

Keep pressing the jog lever down during playback and release it at the point you wish to resume playback.

To search backward

Keep pressing the jog lever up during playback and release it at the point you wish to resume playback.

The unit searches at slow speed (unit of 4 seconds) with playback sound. It is useful to check one word forward or behind.

Then, if you keep pressing the jog lever up or down, the unit starts to search at higher speed.

During cue/review, the counter will be displayed, regardless of the display mode setting (page 34).

You can cue/review during playback pause. Press the jog lever up or down and release it at the point you want to resume playback pause.

16

Page 16
Image 16
Sony ICD-MS1 To stop playback, To select the desired message, Playing the beginning of each message Scanning Play