Sony ICD-MS1 Starting Up the Software, Starting up Memory Stick Voice Editor

Models: ICD-MS1

1 72
Download 72 pages 27.38 Kb
Page 43
Image 43

Starting Up the Software

Starting up “Memory Stick Voice Editor“

1 Turn on your computer and start Windows.

2 Remove the “Memory Stick“ from your IC recorder and connect it to your computer (page 41).

3 Click [Start], and select [Programs], [Memory Stick Voice Editor] and then [Memory Stick Voice Editor].

The “Memory Stick Voice Editor“ starts up. The splash window appears, and after loading the message list file the following main window is displayed.

Note

If the setting of the display of Windows is set to “Large Font“, the main window appears different from the above one. It is recommended to set “Small Font“ in the setting of the display. To change the setting, refer to the instruction manual of Microsoft Windows 95 or Windows 98.

The first time you start the software or when a “Memory Stick“ drive is not found

After the splash window, the following dialog box for specifying the “Memory Stick“ drive is displayed.

Select the “Memory Stick“ drive from the drop-down list and click [OK].

The message folders of the selected drive’s VOICE folder are displayed in the folder list box.

Notes

The drive letter for the “Memory Stick“ differs depending on your computer’s settings or environment.

If you select [Cancel] in the [Select Drive] dialog box, only the player section becomes active.

If a new “Memory Stick“ is inserted in the specified drive or you specify the drive without the VOICE folder, the dialog box stating “No Message Folder exists in Drive “XX.” Would you like to create new Message Folder?” is displayed. Click [Yes] to make the initial setting of the “Memory Stick“ and display the main window.

Click [Cancel] to display the [Select Drive] dialog box.

Notes

Before starting the “Memory Stick Voice Editor“, make sure to insert the “Memory Stick“ into your computer. When you insert it after the “Memory Stick Voice Editor“ is started, the “Memory Stick“ drive cannot be recognized.

Before removing the “Memory Stick“ from your computer, make sure to exit the “Memory Stick Voice Editor“. Otherwise, data may be damaged.

To quit the “Memory Stick Voice Editor“

Click the close button in the right corner of the window or [Exit] from the [File] menu.

Continued

“Memory Stick Voice Editor“ Software Operations

43

Page 43
Image 43
Sony ICD-MS1 Starting Up the Software, Starting up Memory Stick Voice Editor, To quit the Memory Stick Voice Editor