Recording Messages (continued)
Remaining memory indication
During recording, the remaining memory indicator decreases one by one. You can check the remaining recording time by changing to the remaining time display mode (page 34).
Remaining memory indication
RECORDING
Remaining time indication
When the remaining recording time reaches 5 minutes, the remaining memory indication flashes. When the remaining time reaches 1 minute, the remaining time indication will flash in the display window regardless of the display mode (page 34). When the memory is full, recording automatically stops and “NO MEMORY SPACE” will flash in the display window with an alarm sound. To continue recording, first erase some of the messages (page 17).
To review during recording
If you press the jog lever up during recording, recording stops and you can search backwards while listening to fast playback sound.
After you release the jog lever, playback starts from that point.
You can also do this operation during recording pause.
However, you cannot hear the sound during review in this case.
Starting Recording Automatically in Response to the Sound — Advanced VOR function
When the VOR (voice operated recording) function is set to on, recording starts when the recorder detects sound and stops when no sound is heard.
MIC SENS
Set the VOR selector to ON.
OFFON
When you record messages with VOR set to ON, the recording pauses when no sound is detected, and “VOR REC PAUSE” appears in the display window.
To cancel VOR
Set the VOR selector to OFF.
Note
VOR function is affected by the sound around you. Set the MIC SENS selector to either H or L (see the previous page). If recording is not satisfactory after you have changed the microphone sensitivity, or for important recording, set the VOR selector to OFF.
14