To enter characters
Follow the steps below when the display prompts to enter characters (when the cursor is flashing in step 5 for labeling a folder on page 27 or in step 4 for labeling a message on the previous page).
To enter characters
1Press the jog lever up or down to select the desired character.
See the order of character sets on the next page.
2Press the jog lever briefly to fix. The cursor moves to the next.
3Repeat steps 1 and 2 to enter other characters.
To replace characters
When you make a mistake in entering a character or when you want to change the name, enter again after all characters have been deleted by pressing ERASE button for more than one second or replace some of the characters as follows.
1Place the cursor at the character you want to change.
To move the cursor back (to the left), press INDEX button briefly.
To move the cursor forward (to the right), press the jog lever briefly.
2Press the jog lever up or down to select the desired character.
To delete a character and close up the space, place the cursor at the character you want to delete and press ERASE button briefly.
3Press the jog lever to move the cursor forward and repeat steps 1 and 2 to change other characters.
Note
You cannot insert a character into a name. You must simply replace all the characters following the character you want to insert.
Using the jog lever and buttons when labeling a folder / message
Do this | To do |
|
|
Press the jog | Set a character |
lever briefly | (The cursor moves |
| the next). |
Press the jog | Set the name |
lever for more than | (Finishing entering |
1 second | the name). |
Press the jog | Select characters |
lever down briefly | (move to the next). |
Press the jog | Select characters |
lever down for more | (move to the next |
than 1 second | quickly). |
Press the jog | Select characters |
lever up briefly | (return to the previous). |
Press the jog | Select characters |
lever up for more | (return to the |
than 1 second | previous ones quickly). |
Press ERASE | Erase a character. |
briefly |
|
Press ERASE | Erase all characters. |
for more than 1 second |
|
Press DISPLAY | Change character |
briefly | sets. |
Press INDEX | The cursor moves |
briefly | back. |
Character sets |
|
|
|
Order | Characters |
|
|
1 (Capital letters) | A B C D ~ X Y Z |
2 (Symbol 1) | ' , / : (space) |
3 (Small letters) | a b c d ~ x y z |
4 (Symbol 1) | ' , / : (space) |
5 (Numbers) | 0 1 2 ~ 8 9 |
6 (Symbol 2) | ! # $ % & ( ) * . ; |
| < = > ? @ _ ‘ + - ' , / |
| : (space) |
Editing Messages on the IC Recorder
29
