UK
To get the best out of your fan, please read these instructions carefully before using it for the first time.
We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of the fan.
OVERVIEW OF FUNCTIONS
1. | Rear cage | 1. | |
2. | |||
2. | Oscillation button | ||
3. | |||
3. | Front cage | ||
|
4.Stand
5.Height adjustment screw
5.
6. Base
4.
6.
IMPORTANT SAFETY MEASURES
Please ensure that the voltage of the fan corresponds to the mains voltage.
-Use the fan only for the purpose(s) defined in the user guide.
-Never insert your fingers, pencils or other objects through the fan cage during operation.
-Switch the fan off before moving or cleaning.
-The fan should be set up on a stable and level surface to avoid it being knocked over.
-Do not expose the fan to excessive heat or humidity, as this can cause damage to the electrical components.
-Do not immerse in any form of liquid.
-It is not advisable to expose people, in particular babies and the elderly, to a continuous stream of cold air.
-The fan should be kept out of the reach of children.
-Ensure that the cable does not get caught beneath the device, in drawers, behind shelves etc.
-Do not run the cable under carpets, rugs, etc.
-Ensure the cable is kept away from busy areas to avoid anyone tripping over it.
-Do not use if the device or cable becomes damaged. Take it to a specialist for repair.
-For indoor use only.
SETTING UP THE FAN
-Remove the wing screw from the motor pin.
-Fit the rear cage onto the motor pin. Make sure that the 2 holes on the motor match the 2 holes on the rear cage. Fit the wing screw and screw it on firmly.
-Put the blade on the motor pin and carefully tighten the screw.
-Fit the front cage onto the rear cage and fix them together using the metal clips. Tighten the small screw.
USE
The fan has 3 speed settings: 0 – Fan is off
1 – Lowest speed
2 – Medium speed
3 – Top speed
The fan can operate in oscillating or stationary mode. Press the oscillation button to activate the oscillating mode.
The height of the floor fan can be adjusted. Loosen the screw to move the stand up or down as required. Tighten the screw at the desired position.
10
