UK
INTRODUCTION
To get the best out of your new appliance, please read this user guide carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.
SAFETY MEASURES Normal use of the appliance
•Incorrect use of this appliance may cause personal injury and damage to the appliance.
•Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).
•For domestic use only. Not for outdoor or commercial use.
•For connection to 230 V, 50 Hz only. The appliance must be earthed.
•Always turn the appliance off using the on/off button, and unplug it, when it is not in use.
•Please note that the appliance will remain hot for a while after you switch it off. Always allow it to cool completely before you put it away.
•Always keep the appliance at a safe distance from flammable objects such as curtains, tablecloths or the like.
•Never leave unattended when in use, and keep an eye on children.
•The plates get very hot. They must not come into contact with the skin, as this can cause burns.
•Do not cover the appliance, while it is in use.
•Do not expose to direct sunlight for long periods.
•Do not place or store near other heat sources or in a damp environment.
Cord, plug and mains socket
•Keep cord away from hot objects and open flame.
•Check that it is not possible to pull or trip over the cord or any extension cord.
•Remove the plug from the socket before cleaning.
•Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
•Do not wind the cord around the appliance.
•Check regularly that neither the cord nor plug is damaged and do not use if there is any damage, or if it has been dropped on the floor, dropped in water or damaged in any other way.
•If the appliance or plug is damaged, it must be inspected and if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself. Unauthorised repairs or modifications will invalidate the guarantee. Please contact the store where you bought the appliance for repairs under guarantee.
KEY TO MAIN COMPONENTS OF THE APPLIANCE
1.Ceramic hot plates
2.Cord with plug
3.Indicator light
4.Display
5.On/Off button
6.Control buttons
7.Hanging loop
USING THE APPLIANCE
1.Insert the plug (2) in the mains socket and switch on the power. The indicator light (3) will be lit.
2.Press the On/Off button (5) to switch on the appliance.
o The display (4) lights up and shows “Lo” (low heat).
o The appliance begins to heat up, and you can monitor the actual temperature in the display at any time.
3.Set the desired temperature by pressing the control buttons (6). o The numbers in the display
flash, while you set the desired temperature.
o Available temperature settings are
13
