2 | ST60 Tridata Instrument Owner’s Manual |
•Using the trip key to gain access to log, trip, water temperature and timer information.
All key presses are momentary unless otherwise stated.
Depth
Use the depth key to select the required information, as shown in the Using the depth key illustration. The depth measurement units are either feet or metres, as selected during user calibration (see Chapter 4, Calibration).
| Current depth |
|
|
| ||
depth |
|
|
|
| depth |
|
Shallow | To enable/disable any alarm | Anchor deep | ||||
|
|
|
|
| ||
alarm threshold | Press | reset | for 2 seconds | alarm threshold | ||
|
|
|
| (toggle action) |
| |
| To enter and exit alarm adjust mode |
| ||||
| Press | trip | and | reset together |
| |
depth |
|
|
|
|
|
|
|
| In adjust mode, use |
| depth | ||
|
|
|
| |||
Deep | trip | to decrease or | reset to increase | Anchor shallow | ||
alarm threshold |
|
|
|
|
| alarm threshold |
|
|
| depth |
|
| |
Using the depth key |
|
|
|
|
| |
Current depth display
The current depth screen shows the title DEPTH, the selected depth units and the depth measurement. It also shows a depth trend indicator, which is either an up arrow to show seabed rising or a down arrow to show seabed falling.
