Raymarine ST60 Tridata manual Technical support, World wide web, Telephone help line

Chapter 2: Maintenance and Faultfinding			11
	Fault	Cause	Remedy
	Failure of group of	SeaTalk cabling or	Check the security of SeaTalk
	instruments in SeaTalk	connector problem.	connections between functioning and
	chain.		non-functioning instruments.
	LAST flashes or dashes	Depth transducer or	Check depth transducer cable and
	displayed continuously	connection problem.	security of transducer connections.
	(depth greater than 3 feet).
	LAST flashes while under	Aerated water	Ensure readings stabilise when clear of
	way.	Boat wake	disturbed water.

Prop wash etc

CAUTION:

If you need to remove the Speed transducer insert, have the transducer bung to hand and secure it in the transducer body immediately after the insert has been removed, to prevent excessive ingress of water.

Technical support

Raymarine provides a comprehensive customer support service, on the world wide web and by telephone help line. Please use either of these facilities if you are unable to rectify a problem.

World wide web

Please visit the Customer Support area of our web site at:

www.raymarine.com

As well as providing a comprehensive Frequently Asked Questions section and servicing information, it also gives e-mail access to the Raymarine Technical Support Department and a details of the locations of Raymarine agents, worldwide.

Telephone help line

If you do not have access to the world wide web, please call: 1-800-539-5539, extension 2444 or

(603) 881-5200 extension 2444