KEY TO THE VACUUM CLEANER'S PARTS
1.Handle
2.Air valve
3.Telescopic tube
4.Hose
5.Locking mechanism
6.Hose connector
7.Carrying handle
8.Vertical parking holder
9.Storage compartment for special nozzles
10.Handle for opening dust bag container
11.Exhaust grille
12.Handle for removal of exhaust grille
13.Start/stop button
14.Suction force regulation
15.Button for automatic cord rewind
16.Bag change indicator
17.Vertical parking holder
18.Floor nozzle
19.Brush change button
20.Furniture nozzle
21.Joint nozzle
15.
14. 13.
20.
16.
1.
2.4.
3.
5.
19. | 8. |
18. |
|
9.
PREPARING THE VACUUM
CLEANER
•Fit the hose on the vacuum cleaner by inserting the rotating hose connection
(6)into the vacuum cleaner until you
hear a click. To remove the hose, press the button at the side of the hose connection and pull it out.
•Fit the telescopic tube (3) into the other end of the hose, and fit the floor nozzle
(18)to the end of the tube.
|
| • You can adjust the length of the |
10. |
| telescopic tube by pushing the locking |
21. | mechanism (5) down and pulling in the | |
7. |
| bottom section of the tube to a suitable |
| length. When parking, shorten the tube | |
| 6. | |
| as far as possible. | |
|
| |
|
| • The vacuum cleaner’s 2 special nozzles |
|
| (20& 21) are kept in the storage |
|
| compartment (9). Remove the floor |
| 17. | nozzle and fit the special nozzle |
| required to the end of the telescopic | |
|
| |
|
| tube. |
11.12.
19