•Charging capacity of the battery unit depends on the amount of sunlight and is thus depending on geographical position and weather. Obviously, in
Northern Europe the solar cells do not have the same effect as in countries with more sunshine hours, which may affect the effectiveness of the light. If the weather is severely cloudy or on short winter days, recharging may sometimes be insufficient for normal use of the light.
INSTALLATION
Assembly
The appliance must be assembled before use. Ensure that the light (7), the motion sensor (14) and the solar cell panel (3) are all the right way round (see the illustration).
•Attach the two flanges on the motion sensor
(1)over the flange to the light (6). Screw the flanges together with a bolt a nut.
•Attach the two flanges on the solar cell panel
(2)over the flange to the motion sensor
(13).Screw the flanges together with a bolt a nut.
Position
When choosing a position for the appliance, ensure
that the solar cell panel can be angled in the direction of the sun when the motion sensor and the light are angled in the required direction.
•The appliance can be mounted on a wall, post or similar using the bracket for wall mounting (12). o First, securely screw the bracket onto the
desired place.
o Attach the light to the bracket using the clamping screw (5) and a nut.
•The appliance may also be placed in the ground using the accompanying spike.
o First, join the two parts of the spike (10 and 11).
o Press the spike into the ground, where you wish the light to be placed. Gently step
on the support spike (9) in order to secure its position in the ground.
o Press the bracket (8) securely on to the top of the spike.
o Attach the light to the bracket using the clamping screw and a nut.
PREPARING THE APPLIANCE
•Angle the solar cell panel so that it absorbs as much sunlight as possible.
•Angle the light and the motion sensor until they point in the required direction. Tighten the bolts and nuts once each part has been correctly adjusted.
•Leave the batteries to fully charge for two days before using.
USING THE APPLIANCE
•Switch on the on/off button (4) at the reverse side of the solar cell panel.
•The light now switches on when it is dark and the motion sensor registers movement. The light comes on for approx. 30 seconds at a time.
•The light switches off in sunlight and is automatically recharged.
•The motion sensor registers movements within a distance of up to 8 m at the angles of 60º vertical, and 120º horizontal from the position of the motion sensor.
•If the light does not switch on, possible causes are that the motion sensor is affected by artificial light sources, that the batteries are flat or that the on/off button is at the position “OFF” (off).
•Turn the on/off button to position “OFF”(off), if the light is not to be used for a longer period of time.
CLEANING
•Regularly wipe the solar cell panel, the motion sensor and the light with a
•Never use corrosive or abrasive cleaning agents as they may damage the plastic parts of the appliance.
INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that this Adexi product is marked with
this symbol: 
This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately.
15
