6.Place the Pod Holder inside the Pod Chamber. See Figure 6.

7.Place one Melitta® javapod™ or Cooper’s® teapod™ inside the Pod Holder. Press lightly on the javapod™ or teapod™ to make sure it sits evenly inside the Pod Holder.

correctincorrect

correct

FIGURE 9

IMPORTANT: Make sure the paper lip of the coffee pod is contained within the Pod Holder and does not overhang on the rim. See Figure 9.

CAUTION: Use only specially designed Melitta® javapods™ or Cooper’s® teapods™ in your One:One™ Pod Brewing System. The use of loose ground coffee, pods or tea bags not designed for the One:One,.™ may result in poor coffee or tea, and could possibly damage the machine.

CAUTION: Never use torn javapods™ or teapods™ as this could clog the machine and damage it. Each javapod™ or teapod™ is pre-portioned with the optimal amount of coffee or tea required per cup.

8.To close the Lid, press down firmly on the top of the Lid and hold in place while pushing the Lever back so it is flush with the Lid and locks into place. See Figure 7.

CAUTION: Make sure the Drip Spout Assembly is in position inside the One:One.™

9.Place a mug or cup under the Drip Spout. The cup should hold at least 7 to 10 ounces, depending on your selection.

10.When the indicator light stops flashing, the appliance is ready to use. If the indicator light flashes at rapid intervals, see troubleshooting on page 14.

Note: Use one javapod™ to brew either one 5-ounce, bold European serving, or one 8-ounce serving of American-style coffee. When brewing tea, be sure to select the 8-ounce serving.

10