8.Place a 32-ounce container below the Drip Spout to collect the water.

9.Press the Power Light/Indicator Button to turn power on, then simultaneously press the 5-ounce and 8-ounce Serving Buttons, see Figure 8.

FIGURE 8

The water from the Water Tank will cycle through the One:One™. Note: If your One:One™ goes unused for 3 or more days, please

repeat above process (steps 1 - 9).

CAUTION: Do not immerse cord, plug or machine in water or other liquid.

Brewing Coffee or Tea

CAUTION: Before brewing in your One:One™ for the first time, complete the steps listed under “Before Using Your One:One™ Pod Brewing System” on pages 6 - 9 to ensure your machine functions properly.

1.Fill the Water Tank with water up to the ‘MAX’ line. Never pour other liquids such as milk or hot water into the Water Tank. A full tank will yield up to 24-ounces of coffee or tea (three 8- ounce mugs).

2.Press the Power Light/Indicator Button.The indicator light will flash while the water heats up. Heating will take approximately 1-1/2 minutes.

3.To open the Lid, place one finger behind Lever and pull out. Gently raise Lid to open position.

4.Assemble the Drip Spout to the Pod Chamber.

5.Place the Drip Spout Assembly inside the One:One™.

9