•To do so, press the “unit” button, the mea- suring unit selected will then be shown on screen one after the other.
Normal weighing system:
•Gently press the surface of the scale with your foot to switch it on and wait for the screen to show “8888”, then wait until “0,0” appears on the screen.
•Place yourself in the centre of the platform avoiding abrupt movements and without touching other objects, until the appliance shows your weight.
Programming personal data:
•Gently press the surface of the scale with your foot to switch it on.
•Press the Set button and use Up/down button to find the memory number under which you wish to save your personal data (10 memo- ries available). Then press the Set button to confirm your choice.
•Select the weight unit using the Up/buttons and confirming the chosen option by press- ing the Set button.
•Select male or female by using up/down but- tons and confirming by pressing Sett button.
•Log in your age using the up/down buttons and confirming by using Set button.
•Log in your height using the up/down but- tons and confirming by using Set button. These steps can be repeated to program the remaining 9 memories if desired.
Calculate percentage body fat:
•This appliance has the
•This analysis measures the different conduc- tivity between the muscle mass and body mass formed by fat cells using very
•The percentage body weight is calculated us- ing the procedure described above and also involves the following variables: height, age, gender and weight.
•Optimum results according to standards generally applied to adults:
•Men: 14 – 24%
•Woman: 20 – 30%
•Any results below these indicators are con-
sidered underweight and higher than these is considered overweight.
•In the event of doubt, consult your doctor or pharmacist for clarification.
•System for measuring percentage body fat
•Gently press the surface of the scale with your foot to switch it on.
•Use the up/down buttons to access the memory code under which your personal data have already been saved.
•Wait a few seconds until your personal data appears on screen briefly – Gender , age, height and weight unit.
•Wait for the display to show “0,0kg” and then the scale is ready for use.
•Place yourself in the centre of the platform avoiding abrupt movements and without touching other objects, until the appliance shows your weight.
•Do not move and the percentage body fat will be displayed on screen.
•After stepping down the “Auto shutdown” sys- tem will turn it off automatically.
Automatic disconnection function: (stand-by):
•In order to save energy, the appliance passes to
•To return to normal operation simply press lightly on the weighing platform and wait for the screen to show “0.0”.
Once you have finished using the appliance:
•Remove the battery from the appliance if you are not intending to use the appliance during an extended period.
Special messages:
•The following messages can appear on the screen:
•EEEE: means that the appliance’s capacity has been exceeded
•Er: means that there’s an error in the body fat percentage measurement.
•Lo: means that the battery has to be changed/ recharged
Cleaning:
•Clean the equipment with a damp cloth with a few drops of
•Do not use solvents, or products with an acid
20551_IM.indd 4
2013/10/07 01:53:43 PM
