cally switch off the heating element.
8.If point (7) occurs remove the plug from the wall socket immediately and refill the kettle after an adequate cooling down period, about 15 to 20 seconds.
Warning:
1.DO NOT SUBMERSE IN WATER.
2.Only use the base provided with this kettle.
3.If the supply cord is damaged it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid a hazard.
Descaling:
1.Should the appliance switch off before reaching boiling point this is a sign that descaling is necessary.
2.A regular descaling agent may be used. Ensure that the instructions for use are adhered to. In order to avoid spillage do not fill the kettle up to the max mark as the descaling agent may cause the water to foam.
3.To clean the kettle thoroughly of any decalcification residues, boil the kettle several times using clean wa- ter with each cycle. Rinse the kettle with clean water afterwards.
use a slightly damp,
4.It is advisable to remove lime depos- its from the kettle at regular intervals.
Specifications:
Supply voltage:
Power consumption:
Volume: 1.7L
Cleaning and care:
1.Before cleaning the appliance, en- sure that it is disconnected from the power supply and has cooled down completely.
2.Do not use abrasives or harsh clean- ing solutions.
3.Do not immerse the base or the ket- tle in any liquid. To clean the exterior
22400_IM.indd 4 |
|
| 2012/05/24 11:21:06 AM |
|
| ||
|
|
|
|
