| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | Thermostat | Type of | | Steam |
| | | control | |
| | | fabric | |
| | | position | | | |
| | | | | | | | | |
| | | | | | | | | | | | |
| | | | • | Nylon / Silk | | No |
| | | | •• | | Wool | | No |
| | | | ••• | Cotton, Linen | | Yes |
| | | | | | | | | | |
| | | | | | | | | | | | |
It is recommended not to use steam in the • and •• thermostat positions, as water could drip.
-Set the desired temperature with the thermostat control (J), depending on the type of cloth to be ironed (Fig. 3).
-The appliance will be ready for use when the pressure indicator LED (E) lights up (Fig. 4). While ironing, this LED (E) goes on and off auto- matically, this is normal.
-By pressing the steam switch (H) you will get a constant steam jet (Fig. 5). The steam stops when you release the switch.
How to fill the boiler while ironing
To fill the boiler, proceed as follows:
-Eliminate steam pressure from inside the boiler by switching on the steam switch (H) (Fig. 5). -Turn off the boiler (B) and iron (A) switches. -Unplug the appliance from the mains. -Carefully unscrew the cap (F) to let the residual steam out of the boiler.
-Wait for some minutes and carefully pour 1l of water into the boiler using a jug (Fig. 1). -Carefully close the cap (F) again, screwing it to the end.
Vertical ironing
It is possible to iron hanging curtains, garments on their own hangers... (Fig.6)
-Adjust the iron thermostat control (J) to the maxi- mum temperature.
-Iron from top to bottom and press the iron steam switch (H).
Important: For cotton and linen clothes, it is rec- ommended to put the base of the iron in contact with the fabric. For more delicate fabrics, it is rec- ommended to keep the base of the iron at a dis- tance of some centimetres.
Dry ironing
-Connect the professional iron to the mains.
-Turn on the iron switch (A).
-Set the iron temperature with the thermostat con- trol (J), depending on the fabric to be ironed.
After each ironing
-Switch off the professional iron by pressing switches (B) and (A).
-Unplug the power cable (G) from the mains. -Clean the base of the iron while it is still hot, using a damp cloth, after each use.
-The rest of the appliance can also be cleaned us- ing a damp cloth.
Never submerge the appliance in water or any other liquid, or hold it under a running tap. Do not use solvents or abrasive products to clean it.
Maintenance
With the boiler’s descaling system, limescale in- crustations are reduced thanks to the exclusive features of the stainless material used. To clean the inside of the boiler, you simply have to proceed as follows every three months:
Fill the boiler with tap water, shake and empty. Re- peat these steps two or three times consecutively.
To descale:
-Unplug. Empty the content of a bag into the boiler. Fill with water and select the steam position. -Plug in. Switch the professional iron on.
-Place the iron in the ironing position. Activate the steam, shake the iron softly.
-Let the product work for 10 minutes.
-Rinse thoroughly with water & empty completely.