Mellerware 23810 specifications Breakdowns

Breakdowns			Causes	Solutions
Water drips		Iron thermos-		Set the thermostat
from the		tat control (J)		control to the
holes on the		set to the mi-		steam zone "···".
base of the		nimum posi-
iron when		tion "·""··".
turning on		The boiler is		Remove some
the steam
		too full.		water.
switch (H).
		The boiler		Place it on a
		is in a tilted		horizontal sur-
		position.		face.
The iron does		The switch		Switch it to
not heat and				“on” (A).
the LED (K)
does not light
up.
		Iron ther-		Adjust the ther-
		mostat con-
				mostat control.
		trol (J) set to
		the minimum
		position.
		Faulty power		Check the power
		connection.		points.
No steam co-		Empty boiler.		Fill the boiler
mes out				with water.
when pres-
sing the
		Switches (B)		Switch them
steam switch
(H).		and (A) are		on.
	Leak	Cap (F) not		Let the boiler cool
from the		properly clo-		and screw the cap
		sed.		(F) to the end
cap (F).				again.
		Safety valve		Go to an authori-
		activated.		zed Technical
				Service.
The boiler cap		There is		Press the steam
(F) does not		steam re-		switch (H) to let
unscrew easi-		maining in-		the steam out.
ly.		side the
		boiler.

MW_EX_23810_BRAVISSIMO_PRO 2_IM.indd 7 11/17/2009 12:49:22 PM