Mellerware 2650DA manual Use and care, Service, Instructions for use Before use

ance, this will increase the risk of electric shock.

20.Do not touch the plug with wet hands.

21.Take the necessary measures to avoid starting the appliance involuntarily.

22.Do not touch any of the appliance’s moving parts while it is operating.

Use and care:

1.Fully unroll the appliance’s power cable before each use.

2.Do not use the appliance if its accessories are not properly fitted.

3.Do not use the appliance if the accessories attached to it are defective. Replace them im- mediately.

4.Do not use the appliance if the on/off switch does not work.

5.Do not move the appliance while in use.

6.Do not use the appliance if it is tipped up and do not turn it over.

7.Do not force the appliance’s work capacity.

8.This appliance is for household use only, not professional or industrial use.

9.This appliance should be stored out of reach of children and/or the disabled.

10.Do not store the appliance on areas where the temperature could be lower than 2ºC.

11.Do not expose to extreme temperatures or strong magnetism.

12.Keep the appliance in a dry, dust-free place, out of direct sunlight.

13.Make sure that dust, dirt or other foreign objects do not block the fan grill on the appliance.

14.Keep the appliance in good condition. Check that the moving parts are not misaligned or locked and make sure there are no broken parts or anomalies that may prevent the appli- ance from operating correctly.

15.Never leave the appliance unattended while in use.

16.Never leave the appliance connected and unat- tended if is not in use. This saves energy and prolongs the life of the appliance.

17.Do not use the appliance for more than 10 min- utes at once. Let it cool for down for a couple of minutes before using again.

Service:

•Make sure that the appliance is serviced only by specialist personnel, and that only original spare parts or accessories are used to replace existing parts/ accessories.

•Any misuse or failure to follow the instructions for use renders the guarantee and the manufac- turer’s liability null and void.

Instructions for use

Before use:

•Make sure that all the product’s packaging has been removed.

•Before using the product for the first time, clean the parts that will come into contact with food in

the manner described in the cleaning section.

•Prepare the appliance according to the function you wish to use.

Use:

1.Take the length of cable required out of the housing.

2.Connect the appliance to the mains.

3.The LED display will light up, displaying 00:00

4.Press gently with your hand on the upper part while pressing the connect/ disconnect button to raise the upper part (Fig. 1)

5.Place the bowl on base and position as shown (Fig. 2)

6.Place the accessory that will be used on the mounting, ensuring that it fits over the hole and turn in an anti-clockwise direction until it is tightly fitted (Fig. 3)

7.Press the connect/disconnect button and press the upper part downwards until the button is returned to its original position (Fig. 4)

8.Put the lid on to prevent splashing.

9.Start the appliance by turning on the speed regulator.

10.If no specific operating time has been pro- grammed, the LED display will show the time that has elapsed since the operating speed was selected.

11.To avoid a fierce start up of the fan, it is advis- able to start off from the lowest speed posi- tion and, once the fan has been switched on, progressively increase the speed to the desired position.