Safety advice and warnings
-Read these instructions carefully before assembling or switching on the appliance and keep them for future reference. Failure to follow and observe these instructions could lead to an accident.
-Clean all the parts of the product that will be in contact with food, as indicated in the cleaning section, before use.
Working environment:
-The appliance must be used on a flat, stable surface.
-Ensure that the air vents (intake and outlet) do not become totally or partially covered by drapery, clothing etc. as this is a fire hazard.
Electrical safety:
-Do not use the appliance if the cable or plug is damaged.
-Ensure that the voltage indicated on the rating label corresponds with the voltage supply of the wall socket before plugging the appliance in.
-The appliance’s plug must fit into the wall socket properly. Do not alter the plug. Do not use plug adaptors.
-Do not use or store the appliance outdoors.
-Always ensure that the power cord is in a good working condition. Damaged or tangled cords increase the risk of electric shock.
-Do not touch the plug with wet hands.
-Switch off the appliance and disconnect from electricity supply before changing accessories or approaching parts that move during use.
-Do not operate this appliance with wet hands.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Personal safety:
-Do not switch the appliance on if you are not going to use it immediately.
-Do not touch any of the appliance’s moving parts while it is operating.
-Exercise caution after switching off the appliance as the blades will continue to rotate for a brief period.
Use and care:
-Fully unroll the appliance’s power cord before each use.
-Do not use the appliance if its accessories are
not properly fitted.
-Do not use the appliance if the on/off switch does not work.
-Do not apply any additional pressure on the appliance while it is in use.
-Do not force the appliance to process more food or process food quicker than it is capable of processing.
-Remove the plug from the wall socket when the appliance is not in use and before undertaking any cleaning task.
-Remove the plug from the wall socket before replacing any accessory.
-This appliance is for household use only, not professional or industrial use.
-This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance.
-This appliance is intended for adult use. Ensure that this product is not used by the disabled, children or people not familiar with its operation.
-This appliance should be stored out of reach of children and/or the disabled.
-Do not use the appliance for more than 8 minutes at any one time.
-Exercise caution during the assembly and disassembly of the cutting blades, as they are sharp and could cause serious injury.
-Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.
Instructions for use
-Prepare the appliance with the accessory required according to the food to be prepared.
-Cut all foods into pieces (sinewless, boneless and fatless meat is recommended, approximate size: 20 mm x 20 mm x 60 mm) so that the food fits easily into the machine head opening.
-Insert the plug into the wall socket.
-Turn the appliance on using the on/off switch.
-Place food portions on the tray. Use the food pusher to feed the portions down the chute of the mincing head.
Accessories:
Cutting plates (I)
-Cutting plates allow for meat to be minced coarser or finer depending on the size of the holes in the plate.
-Press & hold the lock button while inserting the mincing head (fig. 1). Then turn the mincing head
26602 IM.indd 3
24/08/2011 09:05:22
