Mellerware 29002 specifications Symptom, Cause, Corrections, Trouble Shooting

TROUBLE SHOOTING

Symptom	Cause	Corrections
Water leaking out of the	The glass jug is not situated	The glass jug is not situated
Glass Jug	properly	properly
	The level of water in the tank	The level of water in the tank
	exceeds the MAX indicator.	exceeds the MAX indicator.
Espresso coffee drops out
too slowly (Not only for the	Ground coffee too fine	Use 1# coffee powder.
coffee maker with pump)
The metal parts in the tank	The descaler is not of the	Use the descaler recom-
have rust.	recommended type. It may	mended by Creative House-
	corrode the metal parts in	wares (PTY) LTD
	the tank.
Water leaks from the bottom	There is too much water in	Clean the edge of the filter
of coffee maker.	the drip tray.
	The coffee maker was not	Clean coffee maker per the
	rinsed correctly after clean-	content in the section “be-
	ing mineral deposits.	fore the first use” for several
		times.
Acid (vinegar) taste exists in
	The coffee maker was not	Please use fresh coffee
Espresso coffee.	rinsed correctly after clean-	powder, or store unused
	ing mineral deposits.	coffee powder in a cool,
		dry place. After opening a
		package of coffee powder,
		reseal it tightly and store it in
		a refrigerator to maintain its
		freshness.
The coffee maker does not	The wall socket is not oper-	Plug the power cord into an-
work any more.	ating well, or the plug is not	other wall socket correctly, if
	plugged in properly.	the appliance still does not
		work, please contact with
		the authorized service facil-
		ity or Creative Housewares
		for repairing.
The steam cannot froth.	The steam pipe may be	Use a pin to clear any resi-
	blocked	due from the pipe. Follow
		steps 5-6 under HOW TO
		DESCALE MY COFFEE
		MAKER (For the section of
		making espresso coffee). If
		the problem persists, please
		contact us.

MW_EX29002_Palermo_IM.indd 10

10/29/2008 12:05:32 PM