the appliance off once the froth has reached the desired consistency.
5.You can use the appliance again once it has cooled down (after about 5 minutes).
To heat and froth milk:
1.Pour the desired amount of fresh milk into the jug (MAX 130ml) .
2.Close the lid.
3.Insert the plug into the wall socket. Press the on/off button, the red pilot light will illuminate.
4.The milk will now begin to heat and froth, the appliance will switch off automatically.
5.You can use the milk frother again once the appliance has cooled down (after about 5 minutes).
Cleaning:
1.Always ensure that the appliance is unplugged from the wall socket and that it has cooled down completely before undertaking any cleaning task.
2.After using the appliance, pour clean water and some dish washing liquid into the jug and allow it to stand for a few minutes, then rinse the ap- pliance and wipe it with a clean dry cloth.
CAUTION:
*Do not immerse the appliance in water or any other liquid.
*Do not use any abrasive cleaning agents, or any sharp objects (such as knives or hard brushes) when cleaning this appliance.
Environment:
When you are ready to dispose of the appliance, remove the plug from the wall socket, and cut the power cord. Keep the appliance and its parts out of the reach of children. Deliver the appliance to an approved collection point for small appliances.
MW_29400.indd 3 |
|
| 2013/01/16 01:59:54 PM |
|
| ||
|
|
|
|
