IMPORTANT SAFEGUARDS

•Please read the instruction manual before use and save it for future reference.

•Before first use check that the voltage indi- cated on the rating label corresponds to the main voltage in your home.

•This appliance is intended for house hold use only.

•Do not use the appliance outdoors.

•Do not immerse the appliance’s power cord in water or any other liquids.

•Never pull the power cord to disconnect the plug form the wall socket, instead, grasp the plug and pull to remove it.

•Any damage to the power cord will void your guarantee.

•Do not allow the power cord to touch sharp edges and hot surfaces.

•Always unplug the appliance from the wall socket when filling the water tank with water.

•Do not operate the appliance if it has a damaged power cord or plug, or after the appliance malfunctions, or damaged in any manner. To avoid risk of electric shock, do not disassemble the appliance, take it to manu- facturer for repair.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruc- tion concerning the use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the appliance.

•Do not leave the iron unattended while it is in use.

BEFORE THE FIRST USE

•Remove the protective cover from the sole- plate and clean it with a soft cloth.

•Some parts of the steam iron have been slightly greased and as a result the iron may slightly smoke when switched on for the first time. After a short time this will cease.

HOW TO USE

Always check whether a label with ironing instructions is attached to the clothing article to be ironed. Follow these instructions in all cases.

Turn the temperature control dial to set the appropriate temperature indicated in ironing instructions or in fabric label.

LABEL TYPE OF TEXTILE

Do not iron this article

Synthetics, Nylon, Acrylics, Polyester, Rayon

••Wool, Silk

••• Cotton, Linen

•Insert the plug into the wall socket. The indi- cator light will illuminate.

•When the indicator light switches off you may start ironing.

•If you set the temperature control to a lower setting after ironing at a high temperature, it is not recommended to start ironing before the pilot light switches on again.

WATER TANK FILLING

•Unplug the iron before filling the water tank.

•Hold the iron in a horizontal position.

•Slowly pour water through the water inlet.

•Do not fill past the “MAX” mark on the water tank.

NOTE: Your iron is designed to use tap water, however, if the water is very hard, it is advis- able to use distilled water.

The water tank should be emptied after each use.

SPRAYING

•As long as there is enough water in the water tank, you may use the spray button at any temperature setting during steam or dry iron- ing.

•Press the spray button several times to acti- vate the pump while you are ironing.

STEAM IRONING

•Set the temperature control dial to the ”••” or “•••” position.

•Set the variable steam control to the desired position.

_IM.indd 2

2013/08/22 09:36:06 AM

Page 2
Image 2
Mellerware BLAZE manual Important Safeguards, Before the First USE, HOW to USE, Label Type of Textile, Water Tank Filling