Memorex 53958662 quick start Using Your FlashDrive

•Choose "Yes, I want to restart my computer now" and click OK to reboot your computer to complete the driver installation process.

e.Your Memorex USB Flash Drive is now ready to use. When you insert the drive into an available USB port on your computer, your system will identify the drive, locate the driver software, and complete the driver installation process.

Step 2 – Using Your FlashDrive:

Your new Memorex USB Flash Drive is ready to use now. Follow the simple steps below to begin using your new portable storage device:

a.Remove the protective snap-on cap and insert your new Flash Drive into an available USB port on your computer.

Note: You may be required to wait a few minutes while your new Flash Drive is configuring itself to your computer system. (Click "OK" or "Agree" to any driver prompts should they appear).

b.Restart your computer now to ensure driver installation and drive setup.

c.At the desktop screen double-click on “My Computer.” The

Flash Drive should appear as a “Removable Disk” icon. The actual drive letter assigned to your Flash Drive will vary depending on how many other drives are on your system.

You are ready to begin using your new Memorex USB Flash Drive. Congratulations!