MB2186A O/M.QXD 11/26/02 3:07 PM Page 8

OPERATION

VOICE ACTIVATED (VAS) RECORDING

Voice activated recording will allow dictation only when you speak. When the unit detects a pause of a few seconds, it will temporarily stop recording until it detects sound again.

1

2

 

1

2

 

Press the Stop/Eject button and insert a microcassette tape with the side to be played facing you and the exposed tape facing the right. Close the Cassette Compartment.

For Voice Activated Recording, slide the VAC ON/OFF switch to the ON position and press the Record button (the PLAY button will automatically depress).

3

Speak into the built-in micro- phone or insert a microphone into the MIC jack and speak into it in a normal tone of voice. Adjust the VOLUME/VAC Mic Sensitivity control until your voice activates the recorder (REC/BATT indicator will light).

NOTES:

The first few sounds activate the recorder and may not be recorded.

A variation in voice level during recording will not stop the unit, 2 seconds of silence is required to stop the recording.

For constant recording, see previous page.

When recording, the VOLUME/ VAC Mic Sensitivity control adjusts the microphone sensitivity. At 10, a soft sound will activate the recorder. At 0, a louder sound is required.

8

Page 9
Image 9
Memorex MB2186AOM manual Voice Activated VAS Recording