MC2862 O/M.QXD 9/27/02 10:35 AM Page 10
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1 |
| 2 |
1 | 3 | |
|
|
2 |
|
1 | 1 |
Press the POWER ON/OFF button ❶ to turn the unit on; the POWER indicator will light. Slide the Function switch ❷ to the CD position. Press the PROG button
❸once; “P 01” will appear in the display and the PROGRAM indicator will blink.
Within 7 seconds, select the first track to be played back using the SKIP 
or 
button ❶, then press the PROG button ❷ again. Repeat this step to program additional tracks up to a maximum of 20 tracks.
3 |
4 |
2 |
1 |
Press the PLAY/PAUSE ( 
) button to begin playback. The unit will play all the tracks in the order you programmed them.
Adjust the VOLUME control ❶ as desired. When the disc is through playing, it will stop. Press the STOP (■) button ❷ to stop the disc before it is finished.
NOTES:
•To skip forward or backward through the programs, press the SKIP 
or
button. When the disc is through playing, it will stop.
•Programming is the ability to preselect the order in which a series of tracks will be played.
FAQS: How do I clear the memory?
Press the PROGRAM button to enter the Program mode, and then press the STOP (
) button or change the position of the Function switch.
10
