TABLE OF CONTENTS
WARNING AND PRECAUTIONS | P.1 |
LOCATION OF CONTROLS & POWER SOURCES | P.2 |
POWER SOURCES | P.3 |
HEADPHONE AND | P.3 |
CAR KIT OPERATIONS | P.4 |
PLAYING A CD IMMEDIATELY | P.5 |
CD PLAYBACK | P.6 |
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK | P.6 |
REPEAT PLAYBACK & RANDOM PLAY ( SHUFFLE ) | P.6 |
INTRO & SPECIAL FUNCTIONS | P.7 |
PROGRAMMED PLAY | P.8 |
MAINTENANCE | P.9 |
PRODUCT SPECIFICATIONS | P.10 |
GENERAL INFORMATION | P.11 |
LIMITED WARRANTY | P.12 |
WARNINGS
TO REVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.
Any use of the controls or an adjustment to the procedures other than those specified herein may result in hazardous radiation.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER- SERVICEABLE PARTS INSIDE. PLEASE REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS
•Do not open the CD compartment while the CD is rotating.
•Always keep the CD compartment closed when not in use.
•Keep all foreign objects out of the CD compartment.
•If TV or radio interference occurs during operation, move the unit to a different location within the room or building.
•Place the unit on a stable surface. A vibration or shock to the unit can cause the CD mechanism to mistrack or skip. If operating the unit under circumstances which may subject the unit to these conditions, utilize the digital
•Playing some CD's at high volume can cause vibration leading to mistracking. In this case, lower the volume or relocate the speakers further away from the unit.
•Avoid installing the unit in the locations described below:
•Where it will be in direct contact with water.
•Where it will be in direct contact with a magnet.
•Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
•On top of stereo equipment that radiates too much heat.
•Places lacking ventilation or dusty places.
•Places subject to constant vibration.
•Humid or moist places.
-1 -
