Memorex MD6810PLL manual Cd Operation Continued, Continued On The Next Page

MD6810.PLL.O/M.QXD 6/11/03 2:58 PM Page 10

CD OPERATION (CONTINUED)

NOTES:

•This unit is capable of playing standard CDs or 3” singles; no adapter is required.

•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no disc”.

•As each track is played, the track number and elapsed time are shown in the display.

•To remove the disc, open the CD Compartment, hold the edge of the CD and gently press the center pivot and lift the CD.

•The maximum time of a CD is 74 minutes for this unit.

•“OPEN” will appear in the display when the CD Door is opened.

ANTI-SHOCK SYSTEM

This CD player has a built-in Anti-Shock System that minimizes CD skipping, which is useful when using the CD player in the car. Follow the steps below to activate and understand the Anti-Shock System.

1	2
	2
	1

Open the CD compartment lid by sliding the CD OPEN switch ❶ to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack. Slide the FUNCTION switch ❷ to the CD position.

With a CD inserted, press the PLAY/PAUSE ( )/POWER ON button to turn the unit on.

3

4

The Anti-Shock System will start automatically, the sound will mute for a moment and the display will show the Anti-Shock indicator with no bars in it.

Within a few seconds, the Anti-Shock indicator will fill to indicate music signals are stored in memory.

CONTINUED ON THE NEXT PAGE

10