Memorex MD6888 manual Radio Operation To Listen to the Radio

MD6888.O/M.QXD 4/29/03 9:00 AM Page 7

	RADIO OPERATION
TO LISTEN TO THE RADIO
1	2	2
			2	3
		1
	1

Set the VOLUME control ❶ to minimum and plug the headphone into the PHONES jack. Press the PLAY/PAUSE ( ) /POWER ON button ❷ to turn the unit on.

Slide the FUNCTION switch ❶ to the RADIO position. Press the ESP/BAND button ❷ to select a band (AM or FM).

If listening to FM, press the MODE button

❸to turn FM Stereo ON or OFF.

3
1	2

4
3	1
	2

Press and release the SKIP/SEARCH/

Tuning ❶ or button ❷ to tune a station. Press and hold the

SKIP/SEARCH/Tuning ❶ or button ❷ for Auto Scan (see below).

Adjust the VOLUME control ❶ and DBBS switch ❷ as desired. If FM STEREO reception is weak/noisy, press the MODE button ❸ to turn off Stereo, in this case the reception will be monaural.

5

To turn the radio off, press the STOP (■)/POWER OFF button.

ANTENNAS

AM – This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM – The headphones act as an antenna for FM. Extend the headphone wire for best FM reception.

AUTO SCAN

Press and hold the SKIP/SEARCH/Tuning

or button for approximately one second and the unit will automatically search for the next available station.

7