MK1996.OM.QXD 5/19/03 12:03 PM Page 11
OPERATION (CONTINUED)
CALLING ANOTHER PARTY
To alert another party that you wish to communicate with them, perform the following:
1 |
2 |
1 |
2 |
Press the FUNC button ❶, then select a desired channel using the CHANNEL/VOLUME Up ❷ or Down
❸buttons. Press the FUNC button ❶ again to confirm the channel.
Press the CALL button once and wait for the party’s response.
NOTES:
•Note that both the calling and receiving units must be on the same main channel and
•When the CALL button is pressed, the Signal Strength indicators will appear in the display.
MONITORING THE CHANNEL
This feature is used for listening to weak signals or to hear all activities on the channel by manually overriding the channel
1 |
2 |
To activate, press and hold the Monitor button for two seconds; the Monitor indicator will appear.
To disable and return to normal operation, press the Monitor button again for two seconds; the Monitor indicator will disappear.
11
