Yamaha RX-V1600 owner manual Specifications, 121

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.04% THD, 8 Ω	.................................... 120 W
• Dynamic Power (IHF)
8/6/4/2 Ω	155/195/250/330 W

•Maximum Power (EIAJ)

[Asia, General, China and Korea models]

1 kHz, 10% THD, 6 Ω	170 W
• Maximum Output Power [U.K. and Europe models]
1 kHz, 0.7% THD, 4 Ω	170 W
• Dynamic Headroom
8 Ω	1.03 dB
• IEC Output Power [U.K. and Europe models]
1 kHz, 0.04% THD, 8 Ω	125 W
• Damping Factor (IHF)
20 Hz to 20 kHz, 8 Ω	140 or more
• Input Sensitivity/Input..................................................................Impedance	3.5 mV/47 kΩ
PHONO
CD, etc	200 mV/47 kΩ
MULTI CH INPUT	200 mV/47 kΩ
• Maximum Input Signal
PHONO (1 kHz, 0.1% THD)	60 mV or more
CD, etc. (1 kHz, 0.5% THD)	2.4 V or more
• Output Level/Output..........................................................Impedance	200 mV/1.2 kΩ
OUT (REC)
PRE OUT	1.0 V/500 Ω
SUBWOOFER	2.0 V/500 Ω
ZONE 2/ZONE 3 OUT
[U.S.A., Canada, Australia, U.K. and Europe models]
................................................................................	1.0 V/1.2 kΩ
• Headphone Jack Rated Output/Impedance
CD, etc. (1 kHz, 40 mV, 8 Ω)	150 mV/100 Ω
• Frequency Response
CD to Front L/R	10 Hz to 100 kHz, +0/–3 dB
• RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz)	0 ± 0.5 dB

•Total Harmonic Distortion PHONO to OUT (REC)

(20	Hz to 20 kHz, 1 V)	0.02% or less
CD, etc. to Front L/R
(20	Hz to 20 kHz, 60 W, 8 Ω)	0.04% or less

•Signal to Noise Ratio (IHF-A Network) PHONO (5 mV) to Front L/R

[Australia, U.K. and Europe models]	..................... 81 dB or more
[Other models]	86 dB or more
CD, etc. (250 mV) to Front L/R	100 dB or more
• Residual Noise (IHF-A Network)
Front L/R	150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (shortened) to Front L/R	60 dB/55 dB or more
CD, etc.
(5.1 kΩ shortened) to Front L/R	60 dB/45 dB or more

• Tone Control Characteristics (Front L/R)
BASS Boost/Cut	±6 dB/50 Hz
BASS Turnover Frequency	350 Hz
TREBLE Boost/Cut	±6 dB/20 kHz
TREBLE Turnover Frequency	3.5 kHz
• Zone 2/Zone 3 Tone Control Characteristics (Front L/R)
BASS Boost/Cut	±10 dB/100 Hz
BASS Turnover Frequency	450 Hz
TREBLE Boost/Cut	±10 dB/20 kHz
TREBLE Turnover Frequency	1.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back)	12 dB/oct.
L.P.F. (Subwoofer)	24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray Back)
[U.S.A., Canada, General and Korea models]			....................	NTSC
[U.K., Europe, Australia, Asia and China models]				PAL
• Video Signal Type (Video Conversion)				NTSC/PAL
• Signal Level	.................................................................			1 Vp-p/75 Ω
Composite
S-video	1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)
Component	................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Maximum Input Level (V CONV. off)			1.5 Vp-p or more
• Signal to Noise Ratio (V CONV. off)				60 dB or more
• Frequency Response (MONITOR OUT)
Component (V CONV. off)		5 Hz to 100 MHz, ±3 dB

FM SECTION

• Tuning Range
[U.S.A. and Canada models]	87.5 to 107.9 MHz
[Asia and General models]	87.5/87.50 to 108.0/108.00 MHz
[Other models]	87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF)
Mono/Stereo	2.0/25 µV (17.3/39.2 dBf)
• Usable Sensitivity (IHF)	1.0 µV (11.2 dBf)
• Selectivity (400 kHz)	70 dB
• Signal to Noise Ratio (IHF)
Mono/Stereo	76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo	0.2/0.3%
• Stereo Separation (1 kHz)
Stereo	42 dB
• Frequency Response
Stereo	20 Hz to 15 kHz, +0.5, –2 dB
• Antenna Input (unbalanced)	75 Ω

AM SECTION

• Tuning Range
[U.S.A. and Canada models]	.............................. 530 to 1710 kHz
[Asia and General models]	530/531 to 1710/1611 kHz
[Other models]	531 to 1611 kHz
• Usable Sensitivity	300 µV/m

INFORMATION ADDITIONAL

121