CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press MASTER ON/OFF to release it outward to the OFF position to turn off this unit, the main room, Zone 2 and Zone 3 and then disconnect the AC power plug from the AC wall outlet.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by MASTER ON/OFF. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

iii

Page 4
Image 4
Yamaha RX-V1600 owner manual Iii, For Canadian Customers, Pour LES Consommateurs Canadiens, Serial No

RX-V1600 specifications

The Yamaha RX-V1600 is a powerful and versatile A/V receiver that has gained acclaim for its robust features and exceptional audio performance. Launched in the mid-2000s, this receiver remains a popular choice among home theater enthusiasts looking to enhance their audio and video experience.

One of the standout features of the RX-V1600 is its capability to deliver a whopping 7.1-channel surround sound output, which immerses listeners in a rich audio environment. This is achieved through its rated power output of 130 watts per channel, providing ample power to drive both small and large speakers effectively. The receiver is compatible with various surround sound formats, including Dolby Digital and DTS, ensuring that users enjoy a fully immersive cinematic experience.

Incorporating advanced digital processing technologies, the RX-V1600 enhances audio clarity and fidelity. Yamaha's proprietary CINEMA DSP technology allows users to simulate a range of acoustic environments, making it feel as if they are in a concert hall or a movie theater. Additionally, the receiver features a comprehensive suite of equalization options, enabling users to tailor the sound to their preferences and room acoustics.

The RX-V1600 also comes equipped with a range of connectivity options, making it versatile for different audio and video sources. It includes multiple HDMI inputs, which allow seamless integration with high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports upscaling video signals to 1080p, enhancing the viewing experience for non-HD content.

Furthermore, the RX-V1600 boasts Yamaha’s YPAO (Yamaha Parametric Room Acoustic Optimizer) technology, which automatically measures the acoustics of the room and calibrates the audio output accordingly. This ensures that users receive the best possible sound quality tailored to their specific environment.

With its blend of advanced technology, impressive power output, and comprehensive connectivity options, the Yamaha RX-V1600 remains a valuable choice for anyone seeking a high-performance audio-video receiver to help create an outstanding home theater experience. Its durable build, user-friendly interface, and flexible functionality make it a lasting investment for sound enthusiasts. Whether for movies, music, or gaming, the RX-V1600 delivers an engaging auditory experience that continues to impress users even years after its release.