MKS2461 O/M.QXD 8/27/01 10:45 AM Page 15
CARE AND MAINTENANCE (CONTINUED)
Caring for Compact Discs
•Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc.
•Do not attach adhesive tape, stickers, etc. to the disc label.
•Clean the disc periodically with a soft,
•If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
•When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in circular motions.
B
E
N
ZENE
C
L
E
ANER
• This unit is designed to play only compact discs bearing the identification logo as shown here. Other discs may not conform to the CD standard and may not play properly.
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure or extreme temperatures can warp the disc.
• Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink may damage the surface.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
| CottonSwab |
| Capstan |
• | The finish on your unit may be cleaned ith a dust cloth and cared for as other furniture. Use caution | ||
| when cleaning and wiping the plastic parts. |
|
|
• Mild soap and a damp cloth may be used on the front panel. | |||
• | Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound | ||
| reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton | ||
| swab moistened with head cleaning s lution or isopropyl alcohol, then wipe dry with another swab. | ||
| Erase | R/P | PinchRoller |
| Head | Head |
|
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the tape assembly.
15
