4.Press PROGRAM to store the selected track.
~
5.Repeat Steps 3 and 4 to program up to
20 tracks.
Note: You cannot store more than 20. tracks. If you try to program a 21 st track, the system does not store it.
6.Press PLAY/PAUSE to play the programmed tracks. The first track number appears on the display with the elapsed time of the track in play.
7. Programmed play automatically stops at the end of the last programmed track. To stop the CD/CD+G's total number of tracks and playing time appear.
Reviewing/Replacing a
Programmed Sequence
While play is stopped, repeatedly press PROGRAM to review the programmed
sequence.
To replace a programmed track, press PROGRAM until the position number of the track you want to replace appears.
Then repeat Steps 3 and 4 to select and store the new track.
Erasing a Programmed
Sequence
You can do any of the following to erase a programmed sequence:
Press OPEN/CLOSE before or after programmed play.
Press POWER. The POWER indicator off.
18
