14．.AC power supply outlet should be putted near to the monitor, and in your reach, so that you can cut off the power supply in time。
Operation instructions：
Connect with the computer：
一、Do turn off the pc and power supply when you connect system。
二、Please operate according to the following procedures when you connect monitor with your system。
1． Connect the power cord for your monitor to the power port on the back of the monitor plug the power cord for the monitor into a nearby outlet.。
2． .Connect your signal cable to the video port on your computer, fasten it,。
3． Press the power switch and open the monitor。
.Following is OSD operation of figure
function for press. | Led for power | switch for power | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
function for press | Led for power |
| switch for power | . | . | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Introduction of function keys：
*“EXIT/H.B”. button is used to switch between three brightness modes (soft ,standard and rich vibrant mode) and to exit the main menu,，“MENU/ENTER”button is to display the menu and to confirm the selection or setting“.
5
