MPD8807.O/M.QXD 5/19/03 7:54 AM Page 5
POWER SOURCES
This CD player requires either two (2) “AA” cell standard batteries (not included) or the AC adapter (not included).
BATTERY INSTALLATION |
|
“Low Battery” will light in the display when | – |
batteries are low (when using battery power). |
1.Open the CD Compartment, then open the+ battery compartment door by pressing in the
tab and lifting it. To prevent the possibility of losing the cover, it cannot be removed.
2.Insert two (2) “AA” cell batteries (not included) +
according to the polarity diagram inside the 
– battery compartment. Alkaline batteries are recommended for the longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment. Reversed batteries may cause damage to the device.
3.Do not mix different types of batteries together (e.g. Alkaline,
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included) to an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC 4.5V jack on the side of the unit and connect the other end into the AC outlet. The batteries are automatically disconnected when the AC adapter is used.
POLARITY: – 
+
5
