Memorex MT2272 owner manual Troubleshooting Guide, Specifications, Accessory, English, Symptoms

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
TV does not	• Make sure the power cord is plugged in.
	• Try another AC outlet.
operate	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
	• Station or CATV experiencing problems,
Poor sound	tune to another station.
	• Check sound adjustments (Volume and Muting).
or No sound
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor picture	• Make sure channels are set into memory.
	• Check antenna or CATV connections, adjust
or No picture
	antenna.
	• Check for sources of possible interference.
	• Check picture control adjustments.
	• Station or CATV experiencing problems,
Poor	tune to another station.
reception on	• Make sure channels are set into memory.
some	• Station is weak, adjust antenna to receive
channels	desired station.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor color or	• Make sure channels are set into memory.
	• Check picture control adjustments.
no color	• Check antenna or CATV connections, adjust
	antenna.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
Picture	tune to another station.
wobbles or	• Make sure channels are set into memory.
drifts	• CATV company is scrambling signal.
	• Adjust antenna.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Check all CATV connections.
No CATV	• Set TV/CATV menu option to the CATV mode.
reception	• Station or CATV system problems, try
	another station.
Horizontal or	• Check antenna connections, adjust or
diagonal bars	re-direct antenna.
on screen	• Check for sources of possible interference.
No reception	• Make sure TV/CATV menu option is in the
above	appropriate mode.
channel 13	• If using antenna, check UHF antenna connections.
	• Batteries are weak, dead or inserted incorrectly.
	• Remote is out of range, move closer to TV
No Remote	(within 15 feet).
	• Make sure Remote is aimed at sensor.
operation
	• Confirm there are no obstructions between
	the Remote and the TV.
	• Make sure the power cord is plugged in.
No reception	• Reset your password.
	• No broadcast on station tuned.
TV shuts off	• Sleep Timer is set.
	• Power interrupted.
	• TV station experiencing problems or program
Closed -	tuned is not closed captioned. Try another channel.
	• Check CATV connection or VHF/UHF
Caption is
	antenna, reposition or rotate antenna.
not activated.
	• Press TV/CAP/TEXT button to turn on the
	closed caption decoder.
Display is not
shown in your	• Select proper language in the menu options.
language.

ENGLISH

SPECIFICATIONS

AC Power Input:	120V, 60Hz
AC Power Consumption:	125 Watts
Chassis Construction:	IC Solid state
Picture Tube:	27" (measured diagonally)
Horizontal resolution:	260 lines
Audio Power Output Rating:	2.5 + 2.5 Watts
Speaker:	2" x 3-1/2" Full Range, 8 ohm x 2
Tuner Type:	181 Channel, Quartz PLL Frequency Synthesized
Remote Control:	Infrared, Direct Access, 2 x AA batteries (not supplied)
Receiving Channels:	VHF	2-13
	UHF	14-69
	CATV	01-97 (5A)-(A-3)
		98-99 (A-2)-(A-1)
		14-22 (A)-(I)
		23-36 (J)-(W)
		37-65 (AA)-(FFF)
		66-125 (GGG)-(125)
Antenna Input Impedance:	75 Ohm (VHF/UHF/CATV) Coaxial Input
Input/Output:	S-Video Y-Input : 1.0Vp-p/75 ohm
		C-Input : 0.3Vp-p/75 ohm
	Video:	In (RCA) 1.0Vp-p/75 ohm
		Out (RCA) 1.0Vp-p/75 ohm
	Audio:	In (RCA) –8dB/50K ohm
		Out (RCA) –8dB/1K ohm
Dimensions:	25-9/16" (W) x 19-11/16" (D) x 22-1/2" (H)
Weight:	80.5 Ibs

ACCESSORY

Remote Control

11

3L53901A-E 11 1/8/2002, 12:19