16

Initial Settings

After you finish connecting your converter box, you need to run
initial setup, which automatically sets up available channels.
The initial setup appears when you turn on your converter box
for the first time. If you do not want to set up the channels at this
time, you can do it later by selecting the CHANNEL of the
MENU (see page 28).
1. Plug the Power Cable into AC In on the back of the TV, and
press the Power switch on the front panel.
2. Press the STANDBY button on the Remote Control or Front
Panel of TV SET- U[P B O X .
3. Press the▼or▲ button to select language, then press OK
button.
4. Press the▼or▲ button to select Time Zone, then press OK
button.
5. Press the▼or▲ button to select Daylight Saving, then press
OK button.