19
Turning on or off the
Preparation
Perform the following steps before you turning on the
1. Insert the batteries into the remote control unit. (See page
13.)
2. Connect the antenna/cable signal to
(See page 14)
.
3. Plug in the AC cord to the AC outlet.
Turning on the power
1. Press the STANDBY button on the front panel or the remote
control.
Power indicator
ON Lighting(Green)
Standby Lighting(Red)
Turning off the power
1. Press the STANDBY button on the front panel or the remote
control.
2. If you are not going to use this for a long
period
of time, you can plug out the AC cord from the AC outlet.
Screen Saver
If no signal is being received or the signal is very weak, Screen
saver is automatically activated after 2 minutes. “Press any
button to continue” will appear on the screen until you take an
action to dismiss it.
Power Management
will automatically switch to the standby
mode when there is screen saver activate for 4 hours.
Setting the Sleep Timer
You can select a time period of between 30 and 240 minutes
after which the automatically switches to
standby mode.
1. Press the SLEEP button on the remote control.
2. Select the preset time interval for staying on by pressing the
SLEEP button repeatedly.
Sleep
Off
30 minutes
60 minutes
90 minutes
2 hours
4 hours
TV
SET-UP BOX.
TV SET-UP BOX
TV SET-UP BOX
TV SET-UP BOX
TV SET-UP BOX