Set TV Display Mode

MENU SYSTEM

TO ACCESS THE MAIN MENUS:

The setup menu lets you customize the DVD player by allowing you to select various language preferences, set up a parental level, turn captions and screen saver on and off, adjust what type of television screen you have and more.

Below, find the menu, and then find the corresponding page that describes the features of the selected menu option.

Enter the SETUP MENU by pressing the SETUP button. Use the Navigation ( , , , ) buttons to navigate through the menus/screens and press the ENTER/PLAY b®uttonπ †to

select the highlighted option.® To Exit the SETUP MENU, press the SETUP button.

GENERAL SETUP

 

 

 

 

 

 

 

TV DISPLAY: Your can choose a display that affects how a disc’s content appears on your TV

screen.

 

 

 

 

 

 

 

Normal/PS (4:3 Standard): reproduces a 4:3 picture with some distortion.

 

 

 

 

 

 

Normal/LB (4:3 Letterbox): gives best reproduction of pictures recorded in this format (i.e.,

with horizontal bands at the top and button of the screen)

 

 

Dolby

 

 

 

Wide (16:9 Widescreen): reproduces 16:9 format films in full,

 

 

 

TVG

 

 

- - General Setup Page

 

 

 

 

 

- -

 

 

on a 16:9 screen.

 

TV Display

PS

 

Normal/PS

 

 

 

Angle Mark

ON

 

Normal/LB

 

ANGLE MARK: Select ON to turn the angle marks on and OFF

OSD Lang

ENG

 

Wide

HDMI Setup

ON

 

 

 

to turn them off. Anglemarks are not available on all DVDs.

Screen Saver

 

 

 

HDMI Audio

PCM

 

 

 

OSD LANGUAGE: Select the desired language for the On-

Screen display to display text. The DVD must have the language included in order to display it.

SCREEN SAVER: When this option is set to ON, the screen saver will come on when the unit stops or the image is paused for approximately one minute.

When this option is OFF, the screen saver will not come on.

HDMI SETUP: Select the output resolution to correspond with your TV (480i, 480p, 720p

(60Hz), 1080i (60Hz) or 1080p (60Hz). Refer to your TV’s owner’s manual for resolution. The

 

 

 

TV GUARDIAN (CONTINUED)

1.Activate the TVGuardian® function as described and enter the TV Guardian menu as described

above.

 

 

2.Select OFF, TOLERANT, MODERATE, STRICT using the Navigation (π,†) buttons.

NOTE

If you select OFF, you will not able to select or activate the HELL/DAMN, RELIGIOUS,

SEXUAL, CC MODE settings.

 

3.While in the TVGUARDIAN main menu, select HELL/DAMN, RELIGIOUS, SEXUAL using the

Navigation (π,†) buttons. Press the ENTER/PLAY ® button to select Flt (Filter) or OFF (select

Filter to activate the function).

 

4.While in the TVGUARDIAN main menu, select CC MODE using the Navigation (π,†) buttons,

then push the ENTER/PLAY ® button to enter the CC MODE menu. Select OFF, ON MUTE or

ON CONTINUOUS as desired Navigation (π,†) buttons. Press the ENTER/PLAY ® button to

confirm the selection.

 

 

NOTE:

 

To exit the setup; press the SETUP button until the Setup menu disappears from the

screen.

®

 

 

 

 

 

 

TVGuardian..............................................................................................................................Mode

No filtering

Off

 

 

 

Tolerant

Filters only the most offensive foul language

Moderate

Increased standards for language filtering

Strict

 

 

Filters out all common offensive language

Word Subset Filtering

 

 

In addition to the main TVGuardian® Modes listed above, you can turn certain word subsets on

or off according..........................................................to your preferences.

Filters out variations of “Damn” and “Hell”

Damn and Hell

 

Religious Filters out references to deity. (To watch religious programming, turn this word subset off.)

Sexual

 

.....................................................................................

Filters sexually explicit language

CC Mode

Captions are displayed when offensive language is being filtered

On Mute (Default)

On Always

Captions are displayed continually

Off

 

 

Captions are never displayed

DVD Player

User’s Guide

MVD2050

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Caution Marking and Rating Label are located at the rear and bottom enclosure of the unit.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding electrodes and requirements for grounding electrodes.

18. SERVICING

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE

Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been damaged.

f. When the product exhibits a distinct change in performance–this indicates a need for service.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

setting can also be changed by pressing the HDMI/PS button.

Note: If the TV screen is blank, press the HDMI/PS button repeatedly until the picture

appears on the screen again.

CC Channel

®

captioning features while watching a DVD Movie, your television must be

To use the TVG

 

capable of displaying closed captions. Make sure that your TV CC is set to “CC1” or “CC2”

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

PRECAUTIONS

NOTES ON HANDLING:

NOTES ON MOISTURE CONDENSATION:

HDMI AUDIO: Select the desired audio format:

 

 

 

 

 

 

 

 

 

 

 

 

 

SPDIF: No signal output for the coaxial output port.

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM: Select to hear the Digital Output in PCM format.

 

 

 

Dolby

 

 

 

TVG

 

SPEAKER SETUP

 

- - Speaker Setup Page

 

 

 

 

 

 

 

 

 

- -

 

 

Downmix

 

 

 

 

LT/RT

 

 

 

 

 

 

 

 

Stereo

 

 

DOWNMIX:

 

 

 

 

 

 

 

 

 

 

 

 

 

LT/RT: Select to hear the sound in theatrical downmix mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

STEREO: Select to hear the sound in Stereo downmix mode.

 

Set Downmix Mode

 

 

 

 

 

 

 

 

 

 

DOLBY DIGITAL SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

DYNAMIC: Use to slider to set the Dynamic Range. Set to OFF

 

 

 

Dolby

 

 

 

 

TVG

 

 

 

 

 

 

 

 

 

 

 

 

to turn Dynamic Range Off.

 

- - Dolby Setup Page - -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dynamic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FULL

 

 

PREFERENCE SETUP

 

 

 

 

 

 

 

 

 

3/4

 

 

 

 

 

 

 

 

 

 

 

1/2

 

 

 

 

 

 

 

 

 

 

 

1/4

 

 

AUDIO: Select the language the DVD will be played back in

 

 

 

 

 

 

 

 

 

 

OFF

 

 

(ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The

 

Dynamic Range Compression

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD must be recorded in the selected language, otherwise the

 

 

 

 

 

 

 

 

 

 

 

 

 

default language of the DVD will be played.

 

 

 

Dolby

 

 

 

TVG

SUBTITLE: Select the language the Subtitle (OSD) will be in

 

 

 

 

 

 

 

 

 

 

- - Preference Page - -

 

 

 

 

 

 

 

 

 

 

 

English

 

 

 

Audio

ENG

 

 

 

(ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE, OFF).

 

Subtitle

ENG

 

French

 

 

Disc Menu

ENG

 

Spanish

 

Password

 

 

 

 

German

The DVD must be recorded in the selected language, otherwise

 

Default

 

 

 

 

Japanese

the default language of the DVD will be shown.

 

Preferred Audio Language

 

 

 

 

 

 

 

DISC MENU: Select the language the DISC MENU will be in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The DVD’s DISC MENU must be

made in the selected language, otherwise the default language of the DVD will be shown.

PASSWORD

Select this option for password changing. Input your old password (the default password is 1234), then input the new password. Confirm the new password using the Number buttons, then press the ENTER/PLAY button again. The desired new password will then be set; be sure to write it down for future reference.

Select this option to change the TVG® password. You must know the old password in order to change it. If you have forgotten the password, call customer service at the number listed on the Warranty.

DEFAULT: Select this option to reset all the preferences (except PASSWORD) to their original factory settings. This is useful to reset the NTSC System.

TV GUARDIAN

This menu is protected by a password (the default password is 1234). The password can changed in PREFERENCE MENU. TV Guardian (TVG) filters out objectionable language by monitoring the closed captioning (CC) information contained on the DVD. When TVG® detects objectionable words or phrases, it

mutes the audio and displays more appropriate “profanity free” phrases. It also offers various levels of filtering and is easily adjustable with simple on-screen menus.

TO ACTIVATE:

1. Power on the unit, and the following dialog will appear, “Start using your TVGuardian foul

(Close caption on channel 1 or 2), and that the CC channel on your DVD player is set to “CC1” or “CC2”respectively (CC2 is the default setting.)

SETUP HELP

Select this option and press the ENTER/PLAY button to enter the TVG’s Setup Help Menu to find more information on TV Channel Selection and the TVG Web site address. Press the ENTER/PLAY button to exit this option.

 

SPECIFICATIONS

Power Requirements

AC120V, 60Hz

Power Consumption

<15W (approx. 5W when set to Standby mode by remote)

Weight

2.5 Lbs

Dimensions

17 (L) x 9 (W) x 1.7 (H) inches

Weight and dimensions..............................................................................................................are approximate.

NTSC/PAL

Signal System

 

Operating Temperature

+5° to +35°C

Operating Humidity Range

5% to 90% (no condensation)

Discs Played:

 

 

DVD.....................................................................................................-VIDEO Disc

12cm single-sided, single layer

.......................................................................................................

12cm single-sided, dual layer

...................................................................................................

12cm double-sided, single layer

.......................................................................................................

8cm single-sided, single layer

.........................................................................................................

8cm single-sided, dual layer

COMPACT...........................................................................................................................................................................................................................................DISC (VIDEO CD)

8cm double-sided, single layer

12cm disc

USB........................................................................................................................................Slots

8cm disc

2.0

Video Output Level

1Vp-p

Audio Output Level

2Vrms (1KHz, 0dB)

Audio Signal Output Characteristics:

 

Frequency Responses:

20Hz-20KHz (48KHz/96KHz sampling)

DVD (Linear Audio)

 

CD Audio

20Hz-20KHz

S/N Ratio

70dB

Wow and Flutter

Below Measurable Level

Pickup:

655nm

Wavelength

 

Laser Power

Class 1

Specifications are subject to change without notice.

 

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT

CAUTION:

THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION–SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.

LASER WARNING:

This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth

The symbol for class II (Double Insulation)

FCC NOTICE:

This equipment complies with Class B digital device regulations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet and in the back or bottom are provided for

ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCES

This product should be operated only from the type of power

 

• When shipping the DVD player, always use the

 

Moisture condensation damages the DVD

 

 

original shipping carton and packing materials.

 

player. Please read the following carefully.

 

 

For maximum protection, repack the unit as it

 

• Moisture condensation occurs, for example,

 

 

was originally packed at the factory.

 

when you pour a cold drink into a glass on a

 

• Do not use volatile liquids, such as insect spray,

 

warm day. Drops of water form on the outside of

 

 

near the DVD player. Do not leave rubber or

 

the glass. In the same way, moisture may

 

 

plastic products in contact with the DVD player

 

condense on the optical pick-up lens inside this

 

 

for a long time. They will leave marks on the

 

unit, one of the most crucial internal parts of the

 

finish.

 

DVD player.

 

The top and rear panels of the DVD player may

 

Moisture condensation occurs during the

 

 

become warm after a long period of use. This is

 

following cases:

 

normal and not a malfunction.

 

• When you bring the DVD player directly from a

 

When the DVD player is not in use, be sure to

 

cold place to a warm place.

 

 

remove the disc and turn off the power.

 

• When you use the DVD player in a room where

 

• If you do not use the DVD player for a long

 

you just turned on the heater, or a place where

 

 

period, the unit may not function properly in the

 

the cold wind from the air conditioner directly hits

 

 

future. Turn on and use the DVD player

 

the unit.

 

 

occasionally.

 

• In summer, when you use the DVD player in a

 

 

 

 

 

hot and humid place just after you moved the

 

 

 

 

 

NOTES ON CLEANING:

 

 

unit from an air conditioned room.

 

 

 

Use a soft, dry cloth for cleaning.

 

 

• When you use the DVD player in a humid place.

 

For stubborn dirt, soak the cloth in a weak

 

 

Do not use the DVD player when moisture

 

 

detergent solution, wring well and wipe. Use a

 

 

condensation may occur.

 

 

dry cloth to wipe it dry. Do not use any type of

 

 

• If you use the DVD player in such a situation, it

 

 

solvent, such as thinner and benzene, as they

 

 

may damage discs and internal parts. Remove

 

may damage the surface of the DVD player.

 

 

the disc, connect the power cord of the DVD

 

If you use a chemical-saturated cloth to clean

 

 

player to the wall outlet, turn on the DVD player

 

 

the unit, follow that product’s instructions.

 

 

and leave it “ON” for two or three hours. After two

 

Warning: Cleaning and adjustment of lenses

 

 

or three hours, the DVD player will have warmed

 

and/or other components of playback

 

 

up and evaporated any moisture. Keep the DVD

 

mechanism should be performed by a qualified

 

 

player connected to the wall outlet and moisture

 

service technician.

 

 

condensation will seldom occur.

 

NOTE ON LOCATING THE DVD PLAYER:

 

 

TO OBTAIN A CLEAR PICTURE:

 

When you place this DVD player near a TV, radio

 

The DVD player is a high technology, precision

 

or VCR, the playback picture may become poor

 

device. If the optical pick-up lens and disc drive

 

and the sound may be distorted. In this case,

 

parts are dirty or worn down, the picture quality

 

move the DVD player away from the TV, radio or

 

becomes poor. To obtain a clear picture, we

 

VCR.

 

recommend regular inspection and maintenance

 

 

(cleaning or parts replacement) every 1,000 hours

 

 

 

 

 

of use depending on the operating environment.

 

 

 

 

 

For details, contact your nearest dealer.

POWER SOURCE

Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize

 

the possibility of electric shock. If the AC plug does not fit into a

AC Outlet

nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s

 

responsibility to have an electrician replace the obsolete outlet.

 

AC Plug

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

language filter today! Press the SETUP button and select TVGuardian to enable filter. This Message will be displayed five times.”

2. Press SETUP, move the cursor to the tab “TVG” and press ENTER button. A dialog and display registration key appears. You can access the TVG Menu after entering the correct Activation Code.

To activate the TVGuardian® feature, either go to www.TVGuardian.com or call (866-884- 3458). Please have your “Registration Key” ready.

Activation

Once you have obtained your Activation Code, please use your remote control to enter the activation code. Once activated, you may use TVGuardian® for the life of your product. TVGuardian® Setup

WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.

FOR CONSUMER REPLACEABLE PART(S), SEE PART NUMBER(S) ON THE LOCATION OF CONTROLS, PAGE 2, AND THEN CONTACT FOX INTERNATIONAL AT 1-800-321-6993

Memcorp, inc.

 

Weston, FL

 

Printed in Hong Kong

152-06410-0320

Visit our website at www.memorexelectronics.com

4

for cleaning.

6. ATTACHMENTS

Do not use attachments not recommended by the product's manufacturer as they may cause hazards.

7. WATER AND MOISTURE

Do not use this product near water–for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.

8. ACCESSORIES

Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11.GROUNDING OR POLARIZATION

This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs,

20ft

45 45

1

NOTES:

• When there is an obstacle between the DVD and the transmitter, the transmitter may not operate.

• When direct sunlight, an

incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the DVD, the remote operation may be unstable.

Page 1
Image 1
Memorex MVD2050 important safety instructions Menu System, TV Guardian, Important Safety Instructions, Precautions