SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP, LP or SLP) during recording.To rewind or fast forward a tape, press the STOP button, and then press the REW or F.FWD button.
To visually search backward, press the REW button | To visually search forward, press the F.FWD button |
once or twice in the PLAYBACK mode. | once or twice in the PLAYBACK mode. |
REW | F.FWD |
The REVEW indicator will light in the display about 4 seconds. | The CUE indicator will light in the display about 4 seconds. |
Press the PLAY button to resume normal viewing speed. | Press the PLAY button to resume normal viewing speed. |
ENGLISH
SKIP SEARCH
Press the SKIP SEARCH button in the PLAY mode. The VCR will search forward through approximately 60 seconds of the tape (e.g. unwanted commercial time) and then resume normal playback.
SKIP
SEARCH
The CUE 1 indicator will light in the display. (For example : 1 press).
TO WATCH A STILL PICTURE
Press the PAUSE/STILL button in the PLAYBACK mode.
PAUSE/STILL
The STILL indicator will light in the display about 4 seconds. Press the PAUSE/STILL button again to resume normal playback.
SLOW MOTION PLAYBACK | FRAME BY FRAME ADVANCE |
Press the SLOW button in the PLAYBACK mode. Playback will proceed at 1/10th of the normal speed.
SLOW
The SLOW indicator will light in the display about 4 seconds. Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK ADJUSTMENT
If noise bars appear in the picture during slow motion, press the Manual TRACKING + or – button to reduce the noise bars. If the still picture jitters excessively, press the Manual TRACKING + or – button to stabilize the still picture.
Press the SLOW button during STILL playback.
SLOW
The still picture will advance by one frame each time you press the button. Hold the button for continuous frame by frame viewing.
Press the PAUSE/STILL button again to resume normal playback.
NOTES: • Best results during speed search playback can be obtained with cassette tapes recorded in the "SP"and"SLP" mode.
•The audio output is muted during SPEED SEARCH and STILL.
•A few noise bars will appear on the picture during SPEED SEARCH ,STILL, FRAME ADVANCE and SLOW MOTION.
•To prevent damage to the tape, CUE, REVIEW and STILL playback is automatically changed to the PLAYBACK
mode after 5 minutes. | 33 |
|
33 | 25/2/99, 21:28 |
