Memorex MX4302 operating instructions Speaker Connection, Headphones

AC OPERATION

PREPARATION FOR USE

MX4302.O/M.QXD 3/4/03 7:47 AM Page 3

Unwind the AC cord and extend it to its full length. Insert the small end of￿￿￿the AC￿￿￿cord into ￿￿the AC￿￿￿￿￿￿power jack on the rear of the unit. Insert the other end of the AC cord into any convenient 120V 60Hz household outlet.

Please note that this unit is equipped with a polarized AC

plug which has one blade wider than the other. This is a safety feature to reduce the likelihood of electric shock. This polarized AC plug will only fit in a polarized AC outlet. If you

find that you cannot insert this plug into your outlet, you

may have an obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a non-polarized

adapter or by filing the wider blade to make it fit into your

outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace your obsolete outlet.

SPEAKER CONNECTION

1.Place the speakers in convenient locations on either side of the unit. Usually a distance of five to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and acoustics of the room.

2.Locate the Speaker Terminals on the rear of the unit and connect the red wires to the red (+) terminals and connect the black wires to the black (–) terminals.

Red UNIT Black

R

L

+

3.To connect the speakers, press the terminal down, insert the speaker wire and press the terminal back to the lock position.

CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or additional speakers may cause damage to the unit. Never operate the unit without the speakers connected.

HEADPHONES

To listen to the unit through headphones, simply insert the headphones (not included) into the Headphones jack. The speakers will be disconnected when the headphones are plugged in.

3