Memorex MX4302 Repeat Playback, Programmed Playback, Operating Instructions Continued

MX4302.O/M.QXD 3/4/03 7:47 AM Page 13

OPERATING INSTRUCTIONS (CONTINUED)

REPEAT PLAYBACK

1	4		2
3		2		2
			1
	1

To repeat a single track, while in
the Stop mode, press the				To repeat all of the tracks on a
REPEAT/MEMORY UP button ❶				disc continuously, while in the
once; “REPEAT” will blink in the				Stop	mode,	press	the
display. Press the CD Skip/Search				REPEAT/MEMORY UP button ❶
	❷ or	button ❸ to select		twice; “REPEAT” will light in the
the specific track that you wish to				display.	Press	the	CD
repeat. When the desired track				PLAY/PAUSE (		) button ❷ to
number appears in the display,
				begin all tracks repeating.
press the PLAY/PAUSE (			)
button ❹ to begin playback. The

specific track you selected will be repeated continuously. You can press the REPEAT/MEMORY UP button ❶ while a track is playing to repeat that track.

PROGRAMMED PLAYBACK

3

1

2

To cancel Repeat Playback, press the REPEAT/MEMORY UP button ❶ until “REPEAT” dis- appears from the display. You can also cancel Repeat Playback by pressing the CD OPEN/ CLOSE button ❷.

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

2

CD

3

Press the CD Function button to select CD.

Insert a CD with the label side facing up.

Wait for the CD player to read the table of contents and display the total number of tracks and playing time of the disc.

Press the MEMORY/CLOCK SET button; “P-01” (program number), “01” (track number) will appear and “MEMORY” will appear in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

13