Memorex MX5310 manual To Interrupt Playback, To Stop Playback, Skip Search, Manual Search

TO INTERRUPT PLAYBACK:

1. Press the PLAY / PAUSE button.

∙“ “ will appear.

2. Press the PLAY / PAUSE button to resume playback from the same point.

TO STOP PLAYBACK:

Press the STOP button.

TO REMOVE THE CDs:

Whilst in the stop mode, press the OPEN / CLOSE button.

∙The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc tray and remove the remaining disc.

SKIP SEARCH

The skip search function allows you to “SKIP” tracks in the forward or reverse direction in order to go quickly to the desired selection.

CAUTION:

∙Only load to replace CDs on the two forward disc holders. Do not try to force a CD into the back disc holder as this will cause the CD to become jammed resulting in malfunction and / or damage to the system.

∙Make sure that CDs are properly placed in the disc holders.

To skip tracks in the forward direction:

∙Press the button

To skip tracks in the reverse direction:

∙Press the button

MANUAL SEARCH

Use the manual search function to search for any point on the compact disc. Manual search operates from the playback or pause mode only.

To search in the forward direction:

∙Press and hold the button until the desired point is found.

To search in the reverse direction:

∙Press and hold the button until the desired point is found.

Note:

∙During manual search from the playback mode the playback volume will be reduced.

∙During manual search from the pause mode the volume will be cut completely and the search speed will be increased by approximately 2 times the normal speed.

To restart playback, press the / button.

DISC CONTROL BUTTON

∙Direct disc selection.

Press the CD control button (DISC 1 to DISC 3) corresponding to the no. of the required CD Example: To designate DISC 2.

The tracks on the designated CD are played in sequence.

E-8

Memorex.p65 8

11/8/01, 11:11 AM