Memorex RF5700 quick start Turn the computer on

6)Unplug your current mouse connector from the computer

7)Plug the green PS/2 connector on the receiver into the mouse port on your computer. (Fig 6)

Mouse Connector from Receiver (Green)

(Fig 6)

NOTE: After connecting the keyboard, mouse and receiver, you must synchro- nize your devices before they can work together wirelessly. The synchronization process must happen before logging in to Windows (this should be done while the system is booting up).

8) Turn the computer ON.

SYNCHRONIZING YOUR NEW MOUSE, KEYBOARD AND RECEIVER

1)Press the ID Button on the receiver, the LED light will start to blink. (Fig 7)

Receiver Top (Fig 7)

2) Next, turn the keyboard over then press and hold the ID Button until the receiver light is solid (the button is located next to the footpad). (Fig 8) This step may take up to 20 seconds.

Keyboard ID Button (Fig 8)

3)Press the ID Button on the receiver, the LED light will start to blink. (Fig 7)

Receiver Top (Fig 7)

4)Next, turn the mouse over then press and hold the ID Button until the receiver light is solid (the button is located on the bottom of the mouse near the front). (Fig 9)

This step may take up to 20 seconds.

Mouse Bottom (Fig 9)

5)To quickly verify that your new keyboard and mouse are properly synchronized, depress a key or two on your keyboard. If the LED on the Receiver blinks steadily, then it has made the connection. For the mouse, simply move it around on a flat surface and click a button or two. If the LED on the Receiver blinks fast and steady, then mouse has made the connection as well.

6)Now both the mouse and keyboard should be communicating properly. If they do not seem to work please check for proper installation of the batteries and repeat the steps again.

NOTE: The synchronization process must be completed within 30 seconds or you will need to begin it again (repeat steps 1-3 of the "Synchronizing your new Mouse, Keyboard and Receiver" section). If this doesn't work, you may need to repeat step 1 between each device synchronization.

SYNCHRONIZATION TROUBLESHOOTING

"My keyboard and mouse don't work consistently": If the RF5700 receiver is located too close to your computer monitor or to another RF wireless device (such as a cordless phone), you may experience inconsistent results. Move the RF5700 receiver away from the computer monitor and other RF wireless devices to promote better results.

"I'm typing but the letters don't show up in my document": Reboot your com- puter. If the keyboard and mouse still do not function properly, please try replac- ing the batteries with new ones, then resynchronize as shown above (repeat steps 1-3 of the "Synchronizing your new Mouse, Keyboard and Receiver" sec- tion).

"I'm moving my mouse but the cursor won't move": Reboot your computer. If the keyboard and mouse still do not function properly, please try replacing the batteries with new ones, then resynchronize as shown above (repeat steps 1-3 of the "Synchronizing your new Mouse, Keyboard and Receiver" section).

SOFTWARE INSTALLATION

The final step in setting up the RF5700 is to install the included software. The software allows you to program the keyboard's hot keys, special function keys and the extra mouse buttons with preset functionality. This feature is only avail- able to computers using the following Windows Operating Systems: Windows 98SE, Me, 2000 and XP.

NOTE: If you are using a version of Windows not listed above, there is no need to install the software. The software does not support this programmability fea- ture for older versions of Windows.