OPERATION

4.Slide the rear floorboard No."5" under the transom retainer. b

a

 

24016

a - Rear floorboard

b - Transom retainer

5.Fit the remaining floorboards together. Position boards No. "3" and "4" so they are forming an inverted V shape. Align the side edges of the floorboards so they are straight and then push down on the V‑joint to flatten the floorboards.

a

24060

a - Push down

NOTE: The floorboards are strengthened with the side joiners installed on the floorboards. Position these side joiners so they will fit between the rubber stoppers located on the side air chambers.

26

Page 30
Image 30
Mercury Marine 899846001 manual Slide the rear floorboard No.5 under the transom retainer. b