Connecting to other Meridian equipment
To connect to other Meridian 500 Series equipment
One unit will then be designated
as the controller, and display:
Controller
● Connect one of the COMMS sockets on the back panel of the |
DVD player to one of the COMMS sockets on another 500 |
This is the unit that will respond to the remote.
Series unit, using the 500 comms lead provided with the 598 |
DVD Audio Player. |
All the other units will be configured
as
Not Con.
Setting up the DVD player
The sequence in which you connect the units is not important.
598 DVD Player | 500 Series unit |
COMMS | COMMS |
Then configure the units with the following automatic setup procedure:
●Switch all the units to standby.
●Press Clear (remote).
Auto
Each unit will display:
Your system is now set up and ready for use.
●If for any reason the automatic setup does not give the configuration you want, restore the default operation by selecting one of the standard types; see Choosing standard settings, page 62.
Note: Do not, under any circumstances, connect any equipment other than Meridian 500, 800, 600, or 200 Series to the socket marked COMMS on the back of the DVD player.
60
