Setting up the mono power amplifier
Inputs
The following two alternative audio inputs are provided:
Use this input | To connect to this | |||
INPUT | A preamplifier, using a phono | |||
| connector and | |||
| cable. |
|
| |
BALANCED INPUT | A balanced analogue output, using an | |||
| XLR connector: | |||
| 1 | (Green) | = | GND |
| 2 | (Red) | = | +ve |
| 3 | (Black) | = | |
When using the balanced input the phono input should be shorted, using the phono shorting plug supplied.
To connect to a conventional preamplifier
●Connect the socket marked INPUT on the back panel of the power amplifier to the appropriate output from your preamplifier.
You should either use a screened audio cable, or half of a twin- screened audio cable. These cables can have a considerable effect on the quality of the sound, and you are advised to seek your dealer’s advice on the best type of cables for your system.
10
