Mermaid Technology 190 3. Operation

mermaid ActiveMedia Users Manual ver 2.0

3. Operation

Always turn off the monitor before removing or inserting a CF card!

• Turn off the monitor unit by means of the power

switch, located in the “well” on the backside. (1)

• Gently pull out the CF card in the direction of

arrow (2)

• Gently insert new/replacement CF card with the

label face pointing upwards and the pinhole

connector pointing into the slot.

• Turn on the monitor by means of the power switch.

The playback will start within a few seconds.

• Press “Auto-Config” in order to let the monitor

position the new content properly. (3)

The ActiveMedia monitor consists of two individually controlled units:

1. A 4-button operated monitor unit.

2. A remote controlled Flash Player.

Infrared eye

• In order to control the FlashPlayer, the

remote control unit must be pointed

directly against the infrared eye located in

the well on the backside.

• In order to ease up operation, a pinhole is

located on the lower left side of the unit

(seem from the front). To operate the

Player by means of this hole, the

transmitter diode on the remote control

unit must be pointed directly into this hole.

Pinhole

P/N: 20-1700-00460 Page 7 of 24